Yes. The Matrice 30 and the Matrice 30T both stream live from DJI Pilot 2 on the DJI RC Plus remote, using Pilot 2's custom live stream setting with an RTMP address. The stream leaves from the remote over the remote's internet connection, so the aircraft needs no connection of its own. Operators stream the Matrice 30T on Nebli today, by custom RTMP. The model details below are per DJI's documentation.
Add a DJI drone in the Nebli dashboard. It shows one RTMP URL that ends in a short pairing code.
In Pilot 2's custom live stream setting, paste the whole URL into its single RTMP URL field. To change an active stream, exit it first. The Pilot 2 guide shows each screen.
Start the stream. The drone's page goes live in a browser; share the link and its PIN. Video only, nothing to install.

The series has two models, and the camera is what tells them apart. Both use the same remote, app and setup, and DJI's Matrice 30 Series user manual covers both. Per DJI's documentation, except where a line says we measured it.
| Matrice 30 | Matrice 30T | |
|---|---|---|
| Cameras | Wide-angle, zoom, laser range finder | The same, plus a thermal camera |
| Thermal on the stream | No thermal camera | Yes. Your viewers can watch the thermal view live |
| Remote and app | DJI RC Plus, DJI Pilot 2 | DJI RC Plus, DJI Pilot 2 |
| Mobile data | About 4 to 6 GB an hour, measured on our Matrice 4E, not these models | |
Each model has its own page: the Matrice 30 and the Matrice 30T.
On quality, DJI's developer documentation lists five levels for a stream a platform starts, up to 1080p at 3 Mbps, and does not list the levels in Pilot 2's own live stream menu.
Both models fly with the DJI RC Plus, and the stream leaves from that remote, not the aircraft. Per DJI's specs, the RC Plus has Wi-Fi 6 on the 2.4 GHz and 5 GHz bands, so a phone hotspot, a vehicle router or site Wi-Fi can carry the stream. DJI rates its internal battery at about 3 hours 18 minutes, longer than several flights at the series' maximum of 41 minutes.
A regular Matrice 30 or 30T does not fit a DJI Dock. DJI sells separate Dock versions of both with the Dock, per DJI's FAQ.
You cannot edit the address. If a stream is already set up, Pilot 2 opens a summary instead of the editor. Tap Exit, confirm, then edit.
Part of the address is missing. The whole URL goes in the one RTMP URL field, with the pairing code at its end.
The remote has no internet. The stream leaves from the RC Plus, so check its connection before you check the drone.

Put your next flight on a page your client opens in a browser.
Yes. Both the Matrice 30 and the Matrice 30T stream from DJI Pilot 2 on the DJI RC Plus, to a custom RTMP address, per DJI's Matrice 30 Series user manual.
The Matrice 30T. Its viewers can watch the thermal view live. The Matrice 30 has no thermal camera.
Plan for about 4 to 6 GB an hour, measured on our Matrice 4E, not these models. Ours ran at roughly 9.5 to 14 Mbps while Pilot 2's label read 1.5 Mbps.
Yes. Per DJI, both use the DJI RC Plus with DJI Pilot 2.
We and our providers use cookies, only if you agree, to measure how our site is used and how our ads perform, and to show our ads to people who have visited our site. You can change your choice any time in Cookie settings.
Choose which cookies we may use. Necessary cookies are always on; the others stay off unless you switch them on. You can change your choice at any time.
Keep the site working and remember your choice.
Keep the site working and secure, and remember your cookie choice. They do not track you.
Cookies: nb_consent (your cookie choice, 12 months); nb_cc (your country, so we know whether to ask, 1 day).
Measure how the site is used, including session recordings.
Google Analytics 4 (Google) and PostHog (PostHog, Inc.) count visits and record which pages are viewed and how the site is used, including session recordings kept for 30 days, so we can improve it. Data is sent to the United States. Cookies: _ga, _ga_* (up to 2 years); ph_* (up to 1 year).
Measure which of our ads bring sign-ups, and show our ads to people who visited our site.
Google Ads, loaded through Google Tag Manager (Google), and our own campaign cookie measure which of our ads and campaign links lead to visits and sign-ups. Google Ads is also used to show our ads to people who have visited our site. We do not use them to show you other companies' ads. Data is sent to the United States. Cookies: _gcl_* (up to 90 days); hover_attr (up to 90 days).