Yes. A Matrice 4E streams live from DJI Pilot 2 on its DJI RC Plus 2 remote, using Pilot 2's custom live stream setting with an RTMP address. The stream leaves from the remote, so the aircraft needs no connection of its own. We streamed a Matrice 4E on an RC Plus 2 end to end on our own bench, and the figures below are what we measured.
Add a DJI drone in the Nebli dashboard. It shows one RTMP URL that ends in a short pairing code.
In Pilot 2's custom live stream setting, paste the whole URL into its single RTMP URL field. To change an active stream, exit it first. The Pilot 2 guide shows each screen.
Start the stream. The drone's page goes live in a browser; share the link and its PIN. Video only, nothing to install.

These are measured, not taken from a spec sheet. On our bench, a Matrice 4E on an RC Plus 2 sent:
| Measured | |
|---|---|
| Video | H.264, High profile, 1280×720, about 30 fps |
| Bitrate | Roughly 9.5 to 14 Mbps on a healthy connection |
| Mobile data | About 4 to 6 GB an hour at that bitrate |
| Sound | None; the stream is video only |
The bitrate is the number that surprises people. Pilot 2 labels the quality "1.5M", which reads like a cap. On our bench it behaved as a floor: the stream climbed well above it whenever the connection had room. Size a cellular plan on the measured figure, not the label. The full bench write-up has the method.
Per DJI, the Matrice 4E carries a 20MP wide-angle camera with a 4/3-inch CMOS, a 48MP medium telephoto camera, a 48MP telephoto camera and a laser rangefinding module.
The Matrice 4E flies with the DJI RC Plus 2 Enterprise, and the stream leaves from that remote, not the aircraft. Per DJI's specs, the RC Plus 2 Enterprise has 802.11ax Wi-Fi on the 2.4 GHz and 5 GHz bands, and DJI's FAQ has you connect it to the internet over Wi-Fi or a smartphone hotspot to activate it. DJI rates its internal battery at 3.8 hours, against the aircraft's maximum flight time of 49 minutes in no wind with standard propellers.
If you need a thermal view, that is the Matrice 4T: the same series and remote, with a thermal camera.
You cannot edit the address. If a stream is already set up, Pilot 2 opens a summary instead of the editor. Tap Exit, confirm, then edit.
Part of the address is missing. The whole URL goes in the one RTMP URL field, with the pairing code at its end.
The remote has no internet. The stream leaves from the RC Plus 2, so check its connection before you check the drone.

Put your next flight on a page your client opens in a browser.
Yes, from DJI Pilot 2 to a custom RTMP address. We ran it end to end on a Matrice 4E with an RC Plus 2.
We measured roughly 9.5 to 14 Mbps on a healthy connection, although Pilot 2 labels the quality "1.5M". On our bench it behaved as a floor, not a cap.
About 4 to 6 GB an hour, at the 9.5 to 14 Mbps we measured on a Matrice 4E.
No. Per DJI, the Matrice 4T is the version with the thermal camera.
We and our providers use cookies, only if you agree, to measure how our site is used and how our ads perform, and to show our ads to people who have visited our site. You can change your choice any time in Cookie settings.
Choose which cookies we may use. Necessary cookies are always on; the others stay off unless you switch them on. You can change your choice at any time.
Keep the site working and remember your choice.
Keep the site working and secure, and remember your cookie choice. They do not track you.
Cookies: nb_consent (your cookie choice, 12 months); nb_cc (your country, so we know whether to ask, 1 day).
Measure how the site is used, including session recordings.
Google Analytics 4 (Google) and PostHog (PostHog, Inc.) count visits and record which pages are viewed and how the site is used, including session recordings kept for 30 days, so we can improve it. Data is sent to the United States. Cookies: _ga, _ga_* (up to 2 years); ph_* (up to 1 year).
Measure which of our ads bring sign-ups, and show our ads to people who visited our site.
Google Ads, loaded through Google Tag Manager (Google), and our own campaign cookie measure which of our ads and campaign links lead to visits and sign-ups. Google Ads is also used to show our ads to people who have visited our site. We do not use them to show you other companies' ads. Data is sent to the United States. Cookies: _gcl_* (up to 90 days); hover_attr (up to 90 days).