NEBLI
DJI live streaming

Live streaming a DJI Matrice 350 RTK

Yes. A Matrice 350 RTK streams live from DJI Pilot 2 on its DJI RC Plus remote, using Pilot 2's custom live stream setting with an RTMP address. The stream leaves from the remote over the remote's internet connection, so the aircraft needs no connection of its own. We have not streamed a Matrice 350 RTK on our own bench; the model details below are per DJI's documentation.

01

Register the drone in Nebli

Add a DJI drone in the Nebli dashboard. It shows one RTMP URL that ends in a short pairing code.

02

Paste the one Pilot 2 URL

In Pilot 2's custom live stream setting, paste the whole URL into its single RTMP URL field. To change an active stream, exit it first. The Pilot 2 guide shows each screen.

03

Share the PIN page

Start the stream. The drone's page goes live in a browser; share the link and its PIN. Video only, nothing to install.

The Nebli viewer page playing a drone's live feed in a browser, with a LIVE badge over the picture
The page your viewers open: the live picture in a browser, behind a PIN. Screenshot from our bench.

What a Matrice 350 RTK stream carries

Per DJI's documentation, except where a line says we measured it.

Matrice 350 RTK
CamerasWhatever payload you fit. DJI lists the Zenmuse H30, H30T, H20, H20T and H20N among them, the H20, H20T and H20N with payload firmware v7.0 or later; the H30T, H20T and H20N carry thermal cameras
QualityDJI's developer documentation lists five levels for a stream a platform starts, up to 1080p at 3 Mbps. DJI does not list the levels in Pilot 2's own live stream menu
Mobile dataAbout 4 to 6 GB an hour, measured on our Matrice 4E, not this model
SoundNot stated by DJI

The remote does the sending

The Matrice 350 RTK flies with the DJI RC Plus, and the stream leaves from that remote, not the aircraft. Per DJI's specs, the RC Plus has Wi-Fi 6 on the 2.4 GHz and 5 GHz bands, so a phone hotspot, a vehicle router or site Wi-Fi can carry the stream. DJI rates its built-in battery at about 3.3 hours, against the aircraft's maximum flight time of 55 minutes without a payload.

The DJI Smart Controller Enterprise of the older Matrice 300 RTK does not work with the 350 RTK; a DJI RC Plus works with both, per DJI's FAQ.

When the stream will not start

You cannot edit the address. If a stream is already set up, Pilot 2 opens a summary instead of the editor. Tap Exit, confirm, then edit.

Part of the address is missing. The whole URL goes in the one RTMP URL field, with the pairing code at its end.

The remote has no internet. The stream leaves from the RC Plus, so check its connection before you check the drone.

Put your next flight on a page your client opens in a browser.

Common questions

Can a DJI Matrice 350 RTK live stream?

Yes, from DJI Pilot 2 on the DJI RC Plus, to a custom RTMP address, per DJI's Matrice 350 RTK user manual.

Which Matrice 350 RTK payloads have a thermal camera?

Per DJI, the Zenmuse H30T, H20T and H20N. All three are on DJI's list of payloads for the Matrice 350 RTK, the H20T and H20N with payload firmware v7.0 or later.

How much mobile data does a Matrice 350 RTK live stream use?

Plan for about 4 to 6 GB an hour, measured on our Matrice 4E, not this model. Ours ran at roughly 9.5 to 14 Mbps while Pilot 2's label read 1.5 Mbps.

Does my Matrice 300 RTK remote work with the Matrice 350 RTK?

Not the Smart Controller Enterprise. If your Matrice 300 RTK flies with a DJI RC Plus, that remote works with the 350 RTK, per DJI.