NEBLI
DJI live streaming

Live streaming a DJI Matrice 400

Yes, by signing in on the remote. DJI's developer documentation lists the Matrice 400 with the DJI RC Plus 2 and DJI Pilot 2 for a live stream a cloud platform starts, and Nebli connects that way: a one-time email sign-in from Pilot 2 on the controller. The stream leaves from the remote, so the aircraft needs no connection of its own. We have not streamed a Matrice 400 on our own bench.

01

Open the adopt page

In Pilot 2, tap Cloud Service, then Open Platforms. Type https://dash.nebli.ai/adopt and tap Connect. The controller sign-in guide shows each screen.

02

Sign in with your work email

The page reads the controller and aircraft serials. Enter your work email, then the 6-character code Nebli sends you.

03

Adopt and start the livestream

Tap Adopt drone, then start the livestream from Pilot 2's camera view. It appears on the drone's page with its flight readings.

The Nebli viewer page playing a drone's live feed in a browser, with a LIVE badge over the picture
The page your viewers open: the live picture in a browser, behind a PIN. Screenshot from our bench.

What DJI documents for the Matrice 400

Per DJI's documentation, except where a line says we measured it.

Matrice 400
AppDJI Pilot 2, per DJI's FAQ. DJI's developer documentation lists the Matrice 400 with the DJI RC Plus 2 and Pilot 2 for a live stream a cloud platform starts
CamerasWhatever payload you fit. DJI lists the Zenmuse H30, H30T, L3, L2 and P1; the H30T carries a thermal camera
QualityDJI's developer documentation lists five levels for a stream a platform starts, up to 1080p at 3 Mbps
Mobile dataAbout 4 to 6 GB an hour, measured on our Matrice 4E, not this model

What the sign-in connects

Signing in on the remote connects the live video and the flight readings: position, altitude, speed, heading, gimbal angle and battery, on the drone's page in Nebli. A pilot always flies the aircraft; Nebli never flies on its own.

The remote does the sending

The Matrice 400 flies with the DJI RC Plus 2 Enterprise Enhanced, and the stream leaves from that remote, not the aircraft. Per DJI's specs, the remote has 802.11ax Wi-Fi on the 2.4 GHz and 5 GHz bands, and DJI's FAQ has you connect it to the internet over Wi-Fi or a smartphone hotspot to activate it. DJI rates its internal battery at 3.8 hours, against the aircraft's maximum flight time of 59 minutes in no wind.

That remote does not work with the older Matrice 350 RTK, per DJI's FAQ.

When the sign-in will not finish

The adopt page does not open. Type the full address, https:// included.

The drone landed in a new organization. A mistyped email domain creates a separate organization instead of joining your team's. Type your work email carefully.

The connection looks stuck. Open the adopt page again and tap Reconnect. It re-issues the controller's connection without changing what it is connected to.

Put your next flight on a page your client opens in a browser.

Common questions

Can a DJI Matrice 400 live stream?

Yes, by signing in on the remote. DJI's developer documentation lists the Matrice 400 with the DJI RC Plus 2 and DJI Pilot 2 for a live stream a cloud platform starts, and Nebli's controller sign-in connects through Pilot 2's Cloud Service.

Which Matrice 400 payload has a thermal camera?

Per DJI, the Zenmuse H30T, which is on DJI's list of gimbal cameras for the Matrice 400.

How much mobile data does a Matrice 400 live stream use?

Plan for about 4 to 6 GB an hour, measured on our Matrice 4E, not this model. Ours ran at roughly 9.5 to 14 Mbps while Pilot 2's label read 1.5 Mbps.

Does signing in let Nebli fly the Matrice 400?

No. Signing in connects the live video and the flight readings. A pilot always flies the aircraft; Nebli never flies on its own.