Yes. The Matrice 350 RTK on the DJI RC Plus and the Matrice 300 RTK on the DJI Smart Controller Enterprise both stream live from DJI Pilot 2, using its custom live stream setting with an RTMP address, per each model's DJI manual. The stream leaves from the remote over the remote's internet connection, so the aircraft needs no connection of its own. We have not streamed either on our own bench; the model details below are per DJI's documentation.
Add a DJI drone in the Nebli dashboard. It shows one RTMP URL that ends in a short pairing code.
In Pilot 2's custom live stream setting, paste the whole URL into its single RTMP URL field. To change an active stream, exit it first. The Pilot 2 guide shows each screen.
Start the stream. The drone's page goes live in a browser; share the link and its PIN. Video only, nothing to install.

Both stream from DJI Pilot 2 with the same setup. The remote is what tells them apart. Per DJI's documentation, except where a line says we measured it.
| Matrice 300 RTK | Matrice 350 RTK | |
|---|---|---|
| Remote | DJI Smart Controller Enterprise, or DJI RC Plus after a firmware update | DJI RC Plus |
| Thermal payloads | Zenmuse H20T, H20N; H30T with the RC Plus | Zenmuse H30T; H20T and H20N with payload firmware v7.0 or later |
| Max flight time | 55 minutes | 55 minutes, without a payload |
| Mobile data | About 4 to 6 GB an hour, measured on our Matrice 4E, not these models | |
Each model has its own page: the Matrice 300 RTK and the Matrice 350 RTK.
On quality, DJI's developer documentation lists five levels for a stream a platform starts, up to 1080p at 3 Mbps, and does not list the levels in Pilot 2's own live stream menu.
On both, the stream leaves from the remote, not the aircraft. Per DJI's specs, the RC Plus has Wi-Fi 6 on the 2.4 GHz and 5 GHz bands, so a phone hotspot, a vehicle router or site Wi-Fi can carry the stream; the Smart Controller Enterprise takes a 4G dongle. The Matrice 300 RTK's Smart Controller Enterprise does not work with the 350 RTK; a DJI RC Plus works with both, per DJI's FAQ. DJI's Matrice 300 RTK manual, where the custom RTMP stream is described, covers the Smart Controller Enterprise.
The remote still runs DJI Pilot. On a Matrice 300 RTK, the steps here are for DJI Pilot 2. DJI's current Matrice 300 RTK manual is its DJI Pilot 2 edition; the older DJI Pilot edition will not be updated, per DJI.
You cannot edit the address. If a stream is already set up, Pilot 2 opens a summary instead of the editor. Tap Exit, confirm, then edit.
Part of the address is missing. The whole URL goes in the one RTMP URL field, with the pairing code at its end.
The remote has no internet. The stream leaves from the remote, so check its connection before you check the drone.

Put your next flight on a page your client opens in a browser.
Yes. The 350 RTK on the DJI RC Plus and the 300 RTK on the DJI Smart Controller Enterprise both stream from DJI Pilot 2 to a custom RTMP address, per each model's DJI user manual.
Not always. The 350 RTK uses the DJI RC Plus. The 300 RTK uses the DJI Smart Controller Enterprise, or the RC Plus after a firmware update. The Smart Controller Enterprise does not work with the 350 RTK; a DJI RC Plus works with both, per DJI.
Plan for about 4 to 6 GB an hour, measured on our Matrice 4E, not these models. Ours ran at roughly 9.5 to 14 Mbps while Pilot 2's label read 1.5 Mbps.
Per DJI, the Zenmuse H20T, H20N and H30T. All three fit the 350 RTK, the H20T and H20N with payload firmware v7.0 or later; the 300 RTK takes the H20T and H20N, and the H30T when it flies with the RC Plus.
We and our providers use cookies, only if you agree, to measure how our site is used and how our ads perform, and to show our ads to people who have visited our site. You can change your choice any time in Cookie settings.
Choose which cookies we may use. Necessary cookies are always on; the others stay off unless you switch them on. You can change your choice at any time.
Keep the site working and remember your choice.
Keep the site working and secure, and remember your cookie choice. They do not track you.
Cookies: nb_consent (your cookie choice, 12 months); nb_cc (your country, so we know whether to ask, 1 day).
Measure how the site is used, including session recordings.
Google Analytics 4 (Google) and PostHog (PostHog, Inc.) count visits and record which pages are viewed and how the site is used, including session recordings kept for 30 days, so we can improve it. Data is sent to the United States. Cookies: _ga, _ga_* (up to 2 years); ph_* (up to 1 year).
Measure which of our ads bring sign-ups, and show our ads to people who visited our site.
Google Ads, loaded through Google Tag Manager (Google), and our own campaign cookie measure which of our ads and campaign links lead to visits and sign-ups. Google Ads is also used to show our ads to people who have visited our site. We do not use them to show you other companies' ads. Data is sent to the United States. Cookies: _gcl_* (up to 90 days); hover_attr (up to 90 days).